New “Intelligent” AC Fans Provide Temperature-Compensating Technology

BOCA RATON, FL – February 21, 2012: JARO Thermal’s new JDA series of AC fans optimizes temperature by intelligently sensing and regulating RPM levels inside the fan. Thus, as power inputs fluctuate, the fan automatically compensates by decreasing or increasing the fan output (cubic feet per minute). The result is a significant reduction in power consumption, noise and overall cost.

The datasheets for these unique, application-specific products can be found here.
 

CLICK ABOVE FOR HIGH RES IMAGE

Here Is how this new technology works: As the cooler starts to rotate, a high quality aerospace grease lubricates the chamber from the outside of the bearing - moving in. This forms a film between the shaft & bearing which greatly reduces friction & supports the rotating speed. Thanks to the high quality of its’ bearing technology, aerospace lubricant, and in house oil-impregnation method, JARO plans to be the industry leader for LED cooling. The lead time for this model is 4-6 weeks and datasheets can be downloaded here.
 

CLICK ABOVE FOR HIGH RES IMAGE

Honeycomb heatsinks can be used with either plastic or metal/ceramic BGA packages, depending on thermal interface material that is used. In addition, the thin size of the Honeycomb makes it ideal for compact real estate applications. The leadtime runs 8-10 weeks ARO. The data sheets for these unique products can be downloaded here. PATENT PENDING
 

JARO's EXTREME RPM Fan Surpasses CFM Barrier
Rotating at an ultra-fast 15,000 RPM, while producing an unprecedented 21 cubic feet per minute (CFM), JARO's new 40x15mm AG4015 series leads the industry in fan conception & performance. Thanks to a unique impeller design, this powerhouse produces a previously unachievable performance for a fan of this size! This tightly designed (40 x 40 x 15 mm) fan provides an exceptional static pressure (of 0.92 inches of water), while maintaining lower noise levels. The new AG4015 fan is great in all types of applications, including storage, networking, set-top box, game console, and power applications. Data sheet 
 

Rapid-pulse NtelliJet Provides Breakthrough In Spot Cooling Technology
Ultra Low-Power, Low-Profile Cooler Uses Pulses of Air
Boca Raton: December 2009: JaroThermal announced the introduction of its brand new NtelliJetTM series of Low-Profile coolers today. The new low-acoustic cooler uses rapid-fire pulses of turbulent air (produced by an oscillating diaphragm working between 50 and 200hz ) to cool heatsinks and surrounding components. The advantageous features of the NtelliJet cooler present an entirely new concept of thermal cooling ability. In addition to ultra-high reliability and low profile height (max 15mm), there is also a total elimination of mechanical wear, dirt and dust clogging. The new series is also immune to shock & vibration, and provides an impressive 100,000 hours of life at 60°C. The NtelliJet is ideal for focused thermal requirments, when cooling is needed for specific chips or areas of coverage.
DATASHEET

JaroTherm's New AQUAS Meets IP58 Water-Proof' Standard
The new Aquas™ (AQ) line of dc fans now meet the waterproof and dustproof parameters of the IP 58 standard. Jaro's Aquas fans can withstand water jets from any direction and prevent the harmful ingress of dust. In addition, the new fans can withstand submersion at specified depths (exceeding 1 meter). These sturdy fans can also be manufactured to meet a variety of specific water-protection requirements. The products come in a variety of sizes, from 80mm x 80mm x 38mm up to 120mm x 38mm x 120mm. The fans are specifically designed to compensate for moist and dusty environments. Each fan maintains an operating temperature of -10 degrees C to +70 degrees C, with a life expectancy of 50,000 hours at 40 degrees C standard. The Aquas series targets applications with harsh environmental conditions and protects against direct or indirect sprays of water, extended exposure to salt spray, or in air containing fine dust particles. The AQ series can be fitted with a range of IP protected connectors, extended lead lengths, and threaded inserts - for difficult installations. Versions are available in a 60, 70, 80, 92 and 120mm sizes in both 5, 12Vdc, 24 and 48Vdc. The AQ0812HB-A73GL model is competitively priced, with a 10 week lead time.

JaroThermal's 417CFM 'Air-Mover'
The new 'Air-Mover' series is sure to cool off the market's increasing demand for greater performance, capability and speed. Thanks to a unique, high-performance impeller design, this new 172mm x 150mm x 51mm brushless fan delivers an impressive 417CFM (5300rpm) of high-flowing air. In addition to a static pressure of 1.690 inches of H2O, the life expectancy of the 'AD17248UB515100' provides 70,000 hours of long life. With a flexible operating voltage of 24 to 56 VDC, the Air-Mover is at the top of today's cooling revolution. This new fan is perfect for HVAC, server, rack mount, or any other ultra-high output application. Options include on-board PWM control, alarm output, tachometer output, thermistor control, IP55 protection and your choice of connector pre-applied.

Jaro Thermal's New 'NEON-SINK' Is Very Cool
Jaro Thermal's new 52 x 52 x 12 mm Neon fan/heatsink combination is both high performing and low profile. Due to a unique, synergistic marriage of fan to 'open fin' heat sink, the Neon series dissipates .275 watts / degrees C. This results in an exceptionally low thermal resistance. The Neon series is designed for semiconductor applications, including FPGA, XPGA, VGA and most other low profile applications. The life expectancy is 50,000 HOURS of life AT 25 degrees C. Options include alarm output, tachometer output, thermistor control, or your choice of a pre-applied connector. Standardized mounting holes and pre-applied spring loaded fasteners allow for quick and easy application.

Jaro's ULTRA-THIN Fans Are Cutting Edge
JaroThermals newest micro-sized fan has gotten even thinner! This incredibly tiny 'Super-Flow Micro' fan now measures 15 mmW x 15 mmH x 4mm Thin. This little 'windhorse' races along at a breezy 26,000rpm, while producing .3CFM of super-cooled air. This type of technology places JaroThermal at the forefront of the micro-cooling revolution.

The extremely low level of power consumption, which comes from a 2.5Vdc operating voltage, makes the Superflow-Micro ideal for PDA, cell phone, hand-held test equipment, portable power suppliers, and any other 'space-limited' applications. The Superflow-Micro was designed to withstand drop testing of over 7000Gs of force and provide a minimum 50,000 hours of product-life. Current lead-time for production orders are four to six weeks.

OPEN-FIN COOLERS Provide Exceptional Performance
JARO Thermal, announces a powerful new series of light-weight, open-fin, low-profile IC coolers. The new coolers are efficiently-sized and pack an amazing level of thermal performance. The V6X090 model measures in at a compact 70Wx58Lx12H mm, making them ideal for companies that manufacture low-profile equipment. JARO s unique embedded 'fan to sink' design reduces IC installation steps, while saving time and space. This makes them ideal for limited-space requirements such as PCMCIA, PCI express cards; blade servers; and all HOT CHIP SETS.

JARO's V6X090 cooler has an ultra- low operating 'noise to CFM' ratio and is excellent at cooling BGA, graphic and embedded processors and other IC packages; that include microprocessors, FPGAs, DSPs. The unique open-finned design combines both natural and forced air convection while utilizing a pre-applied phase change pad and universal mounts. With a life expectancy of 50,000 hours, this breezy model is simply the best 'cooling value' in its cooling class.

New Addition to Aquas Water-Protected Fans
JARO Thermal announces the newest addition to the Aquas™ line of water protected fans. The new AC rated fans specifically meet the waterproof and dustproof parameters of the IP 55 water protection standard. In addition, these sturdy fans can be manufactured to meet a variety of specific water-protection requirements, as a special order accommodation for the customer. The products come in a variety of sizes, from 80mm x 80mm x 38mm up to 120 120 38 mm. The fans are specifically designed to compensate for moist and dusty environments. Each fan maintains an operating temperature of -10 C ~ +70 C (90 C by special order), with a life expectancy of 50,000 hours at 40 C standard. The Aquas series targets applications with harsh environmental conditions and protects against direct or indirect sprays of water, extended exposure to salt spray, or in air containing fine dust particles. The Aquas™ series can be fitted with a range of IP protected connectors and extended lead lengths, for simple installations. These new fans can be ordered in 110VAC, 220VAC or dual-110/220VAC voltages. The AA1282HB-AWQ-LF model is competively priced, with a 10-12 week lead time.

JARO Presents 'Super Flow Micro' 15mm Fan
JARO Thermal announced the arrival of a remarkably tiny series of high-flowing, micro-sized fans. Spinning at 15,000rpm, the 'Super-Flow Micro ' measures in at an incredibly small 15 * 15 * 06 mm. Producing an impressive .22CFM of cooling air, this new model is ideal for PDA, cell phone and other 'small-spaced' applications. Like all of Jaro's fans, the Super Flow Micro is designed to provide a minimum 50,000 hours of product-life ouput. These new fans are ideal for companies that manufacture high-reliability, long-life, low profile equipment in almost every industry.